Iron Man Mark III Costume

thewrongvine

thewrongvine

The Evolved Panda Commandant
Reaction score
506
Ha, yeah, not without bleeding and dying. That's why I need to find some way tomorrow to like cut off and sand all the sharp edges and pieces.

But it's pretty strong now. I only used one layer each so it's still slightly flexible, but good enough for me since I don't have much time.

I just hope I can make it smooth and safe to wear, would kinda suck if I couldn't because of all the fiberglass spikes. Anyway, my next step (after the sanding stuff) is detailing with Bondo body filler, to add another layer that will even out and smooth out the fiberglass on the outside. Applying that should be much easier than the fiberglass resin, but sanding body filler takes a long time.
 
thewrongvine

thewrongvine

The Evolved Panda Commandant
Reaction score
506
Checkpoint 5: 5/2
2hxu0iw.jpg

1qg7pw.jpg

2iu81o7.jpg

This is with the bondo body filler. I realized too late I put too much, so I would need so much sanding. Since I don't have time, I just rushed the sanding, and painted it. I'll post pictures tomorrow.

In about 24 hours from now... AVENGERS ASSEMBLE!
 
thewrongvine

thewrongvine

The Evolved Panda Commandant
Reaction score
506
Premiere night photos. Sorry for the bad iPhone quality and blurriness, ha. And the helmet came out terrible. Didn't have time to sand it. But I added foam inside so it's wearable now.

2hdwhue.jpg

mpt1u.jpg

syxzqc.jpg


Man dressed as Black Widow hahaha:
2bzdi9.jpg

But I learned a lot through this project. My next helmet will be (should be) so much better.
 
You must log in or register to reply here.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
     +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    New dessert for Summer - https://www.thehelper.net/threads/recipe-lemon-blueberry-layer-cheesecake.194113/
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
     +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
     +2
  • V-SNES V-SNES:
    Happy Friday!
     +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/
  • The Helper The Helper:
    New recipe is Cheeseburger Pie! https://www.thehelper.net/threads/recipe-cheeseburger-pie.194191/
  • The Helper The Helper:
    Latest recipe is Honey Chipolte Chicken Crispers https://www.thehelper.net/threads/recipe-honey-chipotle-chicken-crispers.194210/
  • The Helper The Helper:
    I think we need to add something to the bottom of the front page that shows the Headline News forum that has a link to go to the News Forum Index so people can see there is more news. Do you guys see what I am saying, lets say you read all the articles on the front page and you get to the end and it just ends, no kind of link for MOAR!
  • The Helper The Helper:
    Happy Wednesday!
     +1
  • The Helper The Helper:
    Another summer dessert recipe - Creamsicle Cheesecake - https://www.thehelper.net/threads/recipe-no-bake-orange-creamsicle-cheesecake.194235/
     +1
  • The Helper The Helper:
    Check out this Scratch Strawberry Cake dessert - https://www.thehelper.net/threads/recipe-scratch-strawberry-cake.194283/
     +1
  • V-SNES V-SNES:
    Happy Friday!
     +1

      The Helper Discord

      Members online

      No members online now.
      Online now:
      322 (members: 2, guests: 320)

      Share this page

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top