The Spell Request Thread!

Status
Not open for further replies.

Sgqvur

FullOfUltimateTruthsAndEt ernalPrinciples, i.e shi
Reaction score
62
I am not very happy with your work Glenphir.

You are using a timer system for no reason at all.
A simple one shot timer would have been enough with 1 dummy at the center of the SpellTargetLoc with true sight level set accordingly. But even this won't be good enough like Far Sight.

Your implementation has a big down side in that it requires 20 levels for only
2000 range of true sight while the original Far Sight at level 3 has a revealing area of 4000. 20 levels of ability would also make a map load slower.

Also unlike yours it does reveal for allies of the caster's owner both the map and invisible units.
 

Ayanami

칼리
Reaction score
288
I am not very happy with your work Glenphir.

You are using a timer system for no reason at all.
A simple one shot timer would have been enough with 1 dummy at the center of the SpellTargetLoc with true sight level set accordingly. But even this won't be good enough like Far Sight.

Your implementation has a big down side in that it requires 20 levels for only
2000 range of true sight while the original Far Sight at level 3 has a revealing area of 4000. 20 levels of ability would also make a map load slower.

Also unlike yours it does reveal for allies of the caster's owner both the map and invisible units.

Initially, I did the one shot timer. But then I noticed True Sight can't have multiple levels. If you know any other method to produce the true sight effect, by all means, tell me. I even tried Dust of Appearance, which also can't have multiple levels.

You seem to know how to make this spell on your own too. Are you just trying to simply test me?
 

NeuroToxin

New Member
Reaction score
46
Glenphir, I have a spell in mind, its a bit tricky, and I have never been able to do it for certain reasons, here it is.

Firestorm should be the name, I dont really care what it is.

Firestorm, the archmage channels 3/6/9/12 fireballs around him, always flying at different speeds and heights, always changing, when a unit comes within the radius, a fireball is unleashed from the air, knocking it just outside of the 500 AOE, it takes a second for it to get to him, so he could be anywhere inside, the fireball explodes knocking him out of the AOE and dealing 50/100/150/200 damage. They rotate around him in a circle.

Thanks :)
 

Ayanami

칼리
Reaction score
288
Glenphir, I have a spell in mind, its a bit tricky, and I have never been able to do it for certain reasons, here it is.

Firestorm should be the name, I dont really care what it is.

Firestorm, the archmage channels 3/6/9/12 fireballs around him, always flying at different speeds and heights, always changing, when a unit comes within the radius, a fireball is unleashed from the air, knocking it just outside of the 500 AOE, it takes a second for it to get to him, so he could be anywhere inside, the fireball explodes knocking him out of the AOE and dealing 50/100/150/200 damage. They rotate around him in a circle.

Thanks :)

Okay, so let me get this clear.

3/6/9/12 fireballs will fly around the caster while he is channeling, correct? And these fireballs fly at random speed and height. When an enemy unit comes near the caster, the flying fireball launches towards the entering unit, knocking it back until it's out of 500 AoE of the caster and dealing 50/100/150/200 damage. Then the knockback takes 1 second.

Is that all correct?
 

Sgqvur

FullOfUltimateTruthsAndEt ernalPrinciples, i.e shi
Reaction score
62
>Are you just trying to simply test me?

Well... =)

I was hoping for a novelty from you in that the invisibility detection part of the
spell can be used for any values of the given range.

Thank you for the time it took you to make it though. I appreciate it.

>If you know any other method to produce the true sight effect, by all means, tell me.

If I come up with something (one day...) I will sure.

PS: on my editor True Sight can have multiple levels =)
 

Ayanami

칼리
Reaction score
288
>Are you just trying to simply test me?

Well... =)

I was hoping for a novelty from you in that the invisibility detection part of the
spell can be used for any values of the given range.

Thank you for the time it took you to make it though. I appreciate it.

>If you know any other method to produce the true sight effect, by all means, tell me.

If I come up with something (one day...) I will sure.

PS: on my editor True Sight can have multiple levels =)

o.o
Really? Didn't work for me. The value always remained at its level 1 value. Which Truesight did you use. I believe I used "Truesight (Flying Machine)" or something like that.
 

Sgqvur

FullOfUltimateTruthsAndEt ernalPrinciples, i.e shi
Reaction score
62
Yes True Sight (Flying Machine) and True Sight (Shade) and all the others ofc.
 

Ayanami

칼리
Reaction score
288
any other questions feel free to ask :)

When you say different unit, you mean any random unit in the map? o.o

Yes True Sight (Flying Machine) and True Sight (Shade) and all the others ofc.

It is indeed level able, that I found out. However, I've noticed that the values don't. It will constantly remain at the level 1 value even when the ability is at level 10.
 

NeuroToxin

New Member
Reaction score
46
Okay, so let me get this clear.

3/6/9/12 fireballs will fly around the caster while he is channeling, correct? And these fireballs fly at random speed and height. When an enemy unit comes near the caster, the flying fireball launches towards the entering unit, knocking it back until it's out of 500 AoE of the caster and dealing 50/100/150/200 damage. Then the knockback takes 1 second.

Is that all correct?

Well, if it can, can the fireballs go at a random height like every so and so seconds? like get it so they seem like they're constantly flying up and down? and im not sure, but can it go in and out too? like fly in and out like a dome around the caster? and I meant like a second for the unit to get to the unit, not a 1 second knockback, but other then that, yes, and another related note, kinda like this: http://www.youtube.com/watch?v=xZTeHYpGq9E but in my own vision.

Edit: Forgot to say thanks so much :) I want to know how this is done. Thanks :D
 

Ayanami

칼리
Reaction score
288
Well, if it can, can the fireballs go at a random height like every so and so seconds? like get it so they seem like they're constantly flying up and down? and im not sure, but can it go in and out too? like fly in and out like a dome around the caster? and I meant like a second for the unit to get to the unit, not a 1 second knockback, but other then that, yes, and another related note, kinda like this: http://www.youtube.com/watch?v=xZTeHYpGq9E but in my own vision.

Edit: Forgot to say thanks so much :) I want to know how this is done. Thanks :D

What do you mean by fly in and out? Any sort of distance do you want the fireballs to fly around the caster? Like do you want it to fly around the caster at melee range? And the 1 second thing, do you mean the time for the fireball to travel towards the enemy unit? And, do you want this done it GUI or vJASS?
 

skyblader

You're living only because it's illegal killing.
Reaction score
159
I believe the flying in and out he means closer and further from the caster. I'm trying to create the effects using GUI, just the effects :p
 

Ayanami

칼리
Reaction score
288
I believe the flying in and out he means closer and further from the caster. I'm trying to create the effects using GUI, just the effects :p

Oh. Well all you have to do is to change the offset and height to a random number between a min and a max value every interval where you move the fireball.
 

junicobakura

Member
Reaction score
3
Spell Name: Demon Slash/Onigiri

Code Preference: GUI

Spell Type: MUI if possible

Description: approaches the target point (usually at high speed) and cuts through anything in the way.

Ability Type:Active
Targeting Type: Point and Unit
Mana Cost:100 all levels
Cooldown:10 secs all levels
Casting Range:600 at all levels
Area of Effect:100 at all levels (Line Wideness)
Duration:N/A
Allowed Targets:Enemy Units Non-Structures
Main Damage:?/?/?/250 (Re-Scale)
Bonus Damage:25/50/75/100

Other Remarks: Instantly Moves the caster to the target point and damages all units between the casting point and the target point creating bloody effects on the enemies affected.

deals Main Damage and will deal bonus Damage if casting unit has a negative buff

Things that needs to be editable for future re-balance:
-Main Damage
-Bonus Damage
-Range
-AoE
 

Ayanami

칼리
Reaction score
288
Description: approaches the target point (usually at high speed) and cuts through anything in the way.

What do you mean by "usually high speed"?

Other Remarks: Instantly Moves the caster to the target point and damages all units between the casting point and the target point creating bloody effects on the enemies affected.

Instantly, as in really instantly? Like blink? Or do you want a sliding effect, but a real fast one. I can also leave the sliding speed to be editable if you want.

deals Main Damage and will deal bonus Damage if casting unit has a negative buff

When you say negative buff, you mean any negative buff? Or a certain buff?

And if the spell is targeted at a unit, will it charge towards the unit or just charge towards the initial target position?
 

skyblader

You're living only because it's illegal killing.
Reaction score
159
Oh. Well all you have to do is to change the offset and height to a random number between a min and a max value every interval where you move the fireball.

That would be easy... But I was thinking, that would just move the fireball abruptly in random positions. I'm trying to make it flow, like slowly move in closer and further, higher and lower, faster and slower but random points/speed.
 

Ayanami

칼리
Reaction score
288
That would be easy... But I was thinking, that would just move the fireball abruptly in random positions. I'm trying to make it flow, like slowly move in closer and further, higher and lower, faster and slower but random points/speed.

Well, I think if you set the min and max value to something reasonable, it'll be a smooth effect.
 
Status
Not open for further replies.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top