Gas Problem solved - Water4Fuel

B

baranor

Guest
Tell them that they need to make a flamethrower.

And water as fuel? Didn't the steam engine solve that problem? (Rather inefficiently, though)

no it did not. water was merely the pressure agent. wood, later coal, later oil provided the fuel for steam engines.
 

Chewbalka

New Member
Reaction score
14

its possible but i aint gunna bother to visit that page to find out if its the same thing or works in a diffreant way then hte above video shows it might be possible.
 
Last edited by a moderator:

Lord_Phoenix

Dogs are fuzzy
Reaction score
69
I invented a car that runs on human stupidity and ignorance... I must say thoes are both resources in abundance.
 

Varine

And as the moon rises, we shall prepare for war
Reaction score
808
It won't work like they say it does if this one works at all.

Hydrogen would be created with this: 2 H2O + energy(1) ---> 2 H2 + O2, with the energy being an electrical input. The gas burns: 2 H2 + O2 ---> 2 H2O + energy(2).
Energy(2) would be what makes the car run, but Energy(2) can't exceed Energy(1) unless it violates thermodynamics, which, although I may be wrong, I don't think this system will do.
SO, if this were to work, it would essentially be running off the battery.
 

Wiseman_2

Missy wants blood!
Reaction score
169
Ye cannae break the laws 'o physics, Cap'n!

Minor bump as this little doohicky takes pride of place at the #1 spot of Cracked's new article: 6 Retarded Gas Saving Schemes (People Are Actually Trying)

Energy(2) would be what makes the car run, but Energy(2) can't exceed Energy(1) unless it violates thermodynamics, which, although I may be wrong, I don't think this system will do.
Energy 2 cannot exceed energy 1. The First Law of Thermodynamics states that energy cannot be made or destroyed; only transferred (I think).
This whole concept is completely and utterly flawed, the website's claim that "1883 gallons of combustible gas!!!" (Quoted word for word, punctuation mark for punctuation mark) can be made from a single gallon of water is not only A) technically impossible but B) technically wrong anyway since Gas isn't measured in Gallons. If it was, I seriously doubt you'd want that sort of gas flowing through it, based on its nice ability to burn your face off at the slightest spark.

The guy does get some Kudos though, for coming up with the most ridiculous and obviously false name I have heard in a long time: Ozzie Freedom :rolleyes:
 

UnknowVector

I come from the net ... My format, Vector.
Reaction score
144
>B) technically wrong anyway since Gas isn't measured in Gallons.

In the US it is. Unless you mean gas as in methane. We say gas for gasoline over here. Its all so very confusing.
 

Seb!

You can change this now in User CP.
Reaction score
144
If you actually want to save gas, I recommend this.

A) technically impossible but B) technically wrong anyway since Gas isn't measured in Gallons. If it was, I seriously doubt you'd want that sort of gas flowing through it, based on its nice ability to burn your face off at the slightest spark.

Atleast we don't drive on the left side of the road and say "Ello, mate!"
 

Wiseman_2

Missy wants blood!
Reaction score
169
The Gas he says it turns into is Gas as in Hydrogen (Oxyhydrogen to be precise).
It's flammable properties would help make any car look like a mini Hindenberg, given a small flame.

Atleast we don't drive on the left side of the road and say "Ello, mate!"
That's completely and utterly unrelated to anything I said, I must ask, why did you feel the need to say it?
 

Seb!

You can change this now in User CP.
Reaction score
144
Well I was confused because I didn't know what you meant by gas because it could have been gasoline, but then I wasn't sure and I really wanted to post that way to save gasoline. Then I thought you were making fun of the fact that we called gasoline gas, so I really just said something to say something. :eek:
 

Prometheus

Everything is mutable; nothing is sacred
Reaction score
590
Aparently this works.
This person I know converted his car, he gets like 75 MPG.
 

Varine

And as the moon rises, we shall prepare for war
Reaction score
808
I'll go put it in my car and tell you what happens.
 

The Helper

Necromancy Power over 9000
Staff member
Reaction score
1,701
The guy in the Wikipedia article that was killed was trying to do it for $1500.
 

Jedimindtrixxx

┻━┻ ︵ ¯\(ツ)/¯ ︵ ┻━┻
Reaction score
168
didnt they try to make a car run off water in like the year 1999? as i recall:
water car = big boom x.x
 

Prometheus

Everything is mutable; nothing is sacred
Reaction score
590
Water = Hydrogen.
Hydrogen = Flame that goes up, not around.
Less damage to car if big boom.
 

Varine

And as the moon rises, we shall prepare for war
Reaction score
808
I don't think it matters where the flame goes, there's still going to be a huge concussion and a fucked up car.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top