Tutorial Playing with Apply Ground Tools.

linamus

I r bak!
Reaction score
57
Personally I love much more natturaly looking hills and cliffs. So I never use ussual "Apply One/Two" cliff tool.
Apply ground tools - how I call it - raises/smoothes/lowers ground gently.
Here they are:
q7e2tkybjlteyhzmcb1n.jpg



Raise Tool



The first one called Raise. What it does? Raises.

There's many ways to use that. So many...

A Simple ground:

y14hv16i16276yuv6ljb.jpg

Same ground with litle Raise job.

hklpzdtos2g88jsmyli.jpg

looks better huh?


Lower Tool

Basicaly it's same as raise tool with opposite meaning.
Only usefull stuff I'm doing with it, is rivers.

A Tip: When you create any map, choose "Initial water level - Shallow Water"
Then when the map is created, use Raise tool to cover all water.
Later when you need rivers, just use lower tool to get 'em

fx25btcmwlav5f2rjdf.jpg




Plaetau Tool



I'll keep this tool for the end of tutorial, it's my favorite




Noise Tool and Smooth Tool


Noise tool creates ugly hills and deformates ground.
Smooth tool polishes all edges, attemts to math all terrain in same size.

So those two is perfect couple.
First noise your terrain
Then smooth it:


0zfy6gkaz7krrpws8el.jpg


Doesn't really look like something changed... Just more edges. Oh well, I use this tool rarely anyway.



Plaetau Tool [again]



This lovely tool grabs terrain height on where was it clicked, and by dragging applies same height on other place. This can create different cliff heights, ramps [using with smooth tool] and even craters [ I'll show later ]
So here's this simple map with plaetau:

jcjhj3se1hwaszdszfxi.jpg

The hill levels I've added doesn't really shows up. But wait 'till I swich some terrain tiles:


fne3srnser2ggy0772y.jpg

Now how's that? Let's add some doodads to make this litle place more alive.

bidpb8rws3sw8grx3x8h.jpg

zngwitb1i5f3wadv5os.jpg

72o9k9pqnu8c9degizab.jpg

NOTE: Blizzard's doodads nearly all is oversized. Same with some units. For better effect reduce size 2x of things you place. I did it for rocks, flowers, cattails and critters.


Were done with this map. Now lets pratice to use theese tools with other things:



This time I took barrens theme.

trc3npuprir4mf1bi0a.jpg


508xx46ucnz9m9b16kz.jpg


s7488fwzpfzf8b728g8.jpg


qyen2a8ohfr6ei5squk.jpg


Cliffs is made with Raise tool, litle shuffled with Noise, polished with Smooth, and then one pixel by one pixel raised with Raise again:

Crater is done like this.

Make full Raised Circle. O
Then Using Plaetau press on lower ground, and delete part of the circle, including center. Make it look like this C
After this, your circle should be nothing more than hills oval, and entrance. Use plaetau again, press on one of hill, and cover the entrance. Now you have full circle with low middle - Crater



Some more on Island Theme:


w28rr1p389q7edfczk61.jpg


v202o53lvn45gm686t88.jpg


k352tjyyhoiopkhrrwe2.jpg


mcmwens8p3guxwrzyrk8.jpg


kol63pl6hx7mclv1ya.jpg


hnug99shfm4fosw3ghj.jpg


Comments are welcome



Happy terraining, with new style.






___________________________

Best Ideas Comes When You're Not Thinking
-> The Land Of Wonders
-> Simple Equipment System TuT
 

~GaLs~

† Ғσſ ŧħə ѕαĸε Φƒ ~Ğ䣚~ †
Reaction score
180
>>
Further part is in progress right now:
Don't post 'till I finish


Daxtreme said:
Global Rules​


  • * Only submit complete resources - do not put anything unfinished here. This includes, but isn't limited to half-complete tutorials, WIP spells, "will upload it tomorrow" systems and similar submissions. If you want to promote your unfinished work then there are other forums for that, namely Members' Projects.
    * Submissions with memory leaks will not be approved. Read tutorials on how to remove them if you don't know what they are.
    * You must include a prefix so we know what is the submission. If it is a spell, include the [Spell] prefix ([Spellpack] for more than 1 spell). If it is a system, the [System] prefix applies. For code snippets, the prefix is [Snippet], for tutorials: [Tutorial], for models: [Model], and for textures: [Texture].
    * Please be descriptive. Describe your spell, your system, your snippet, or your tutorial. Especially tutorials and systems.
    * If your submission requires a system or model in order to work, state it and credit the maker. An example of system would be the CSCache, the Local Handle Vars, and the such.
    * Please add at least 1 screenshot of your system/spell/snippet in action. Pictures are highly recommended in tutorials, depending on your subject.
    * Upload the map as an attachment rather than using some file hosting site. It probably wouldn't take much of your upload space and this way you can be sure that it will stay up as long as the site itself is.
    * We want Quality, not Quantity. Thus, submit only what you think is good! If your post contains something like "check out my crappy spell" it will hit graveyard right away.
    * Don't use a poll. It's a much better idea to simply use the already built-in thread rating system (the stars).
    * Please, please, avoid spelling and grammar mistakes. Make your submission clean and presentable.
 

Psiblade94122

In need of sleep
Reaction score
138
the terrain example at the end (that is if its big enough for 2 med sized bases)

(note itll be a while b4 i start working on this one, itll be a new genre for me so yea.... theres still some things i gotta learn)
 
B

benj_war3

Guest
The rest are good.... But the barrens are not that good... They are still good you know.. =))
 

joaoac

Active Member
Reaction score
11
Welll... there are nothing new on this thread. I know all that issues cos I'm also (as yours, I can see) good at terraining and facelifting maps.

But it's still a good job that can encourage noobs to do a nice stylish map.
Nice work.

For that tip on starting a map with the shallow water. If the map start at 1 cliff level, and then you lower the terrain, it also can do rivers, right? (I'm not in home to test, but I think it works).

Oh, if you reduce the size of you pictures, it ll do the same effect and the thread will become less poluted.

+rep for the good job.
 

joaoac

Active Member
Reaction score
11
No dude, don't take it personal. I spoke about the tutorial, not your pictures. They did a good work illustrating the steps. (perhaps you could reduce em a little ;) )
=)
 

ZeroThirteen

New Member
Reaction score
35
Hey, linamus. You are pretty good at terraining. I'm going to submit my map at around 1.6 or so, and you can take a look at my terraining work around then. I think it looks nice for the map.

Nice tutorial, +rep from me.
 

Daskunk

SC2 Forum MVP - TheSkunk #386
Reaction score
186
Meh, you pretty much just said what each tool does, wich anyone with common sense either knows or can fuiger out fast... And its pretty short..
 

Daskunk

SC2 Forum MVP - TheSkunk #386
Reaction score
186
^ Make a better explanation one
Why, they arent needed to be explained is what I clearly said in my post. If I were to make a terraining tutorial, I would focus on somthing else.

Anyways, If some people acaully couldn't understand them right away, this would be a good tutorial.. :cool:
 

Daskunk

SC2 Forum MVP - TheSkunk #386
Reaction score
186
95% maps I've seen in bnet uses nothing but ussual walls. That inspired me to show people what can be done in a much better way. Ain't I'm right?
Huh, Well I sure don't played 95% of the maps then. Or Either that I dont play junky maps with horrible terrian.. o.0
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Staff online

      Members online

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top