My Xp just got slower and slower

tommylee0923

New Member
Reaction score
2
My computer is getting slow like a turtle.:(

I had a long time haven't use it, like an year and an half.

My brother said that it is that slow because of dust which is not cleaned during the time, I don't actually believe that.:confused::confused:

But is that true?:eek:

Is there any solution, or shall I change the hardware?
Like 3D graphic card or the mother broad?

Can I clean the inside of a computer, I am not that careful:eek:, and so I don't want to.

Thanks
 

XXXconanXXX

Cocktails anyone?
Reaction score
284
Try deep cleaning your computer.

Control Panel > Performance and Maintenance > Disk Defragmenter

Control Panel > Perofrmance and Maintenance > Free up space on your hard disk

Might try an antivirus/anti adware like Ad Aware or Ad Aware or the Microsoft Antivirus program to clean up an little buggers causing additional slowness.
 

Slapshot136

Divide et impera
Reaction score
471
as far as dust goes, it is a good idea to clean your computer every once in a while, because it slows down so it does not overheat, which happens faster when there is dust, just open it up and vacuum it, use a brush or compressed air to get the harder-to-reach places, and then close it back up
 

tommylee0923

New Member
Reaction score
2
Is it possible that I don't need to open the computer and get the faster computer. Like the first guy said. (I'm think that this way should be better)

I don't want to use a brush and brush the inside of the computer because I don't want to damage my computer.
 

Fun_

New Member
Reaction score
1
Try downloading Spyware Doctor. It is from Microsoft, and I am on Windows XP also. It blocked the viruses from my computer, including 4 spyware threats.

Here is the link to it: http://spywaredoctor.com/

Scroll down to the bottom of the page, click download, then save it in My Documents. The execute it, then make sure all of any Adware/Spyware/Parasites/Viruses/Worms, or anything that is on your computer, is cleaned off of your computer quickly.
 

tommylee0923

New Member
Reaction score
2
I have that programme, but that doctor just made my computer even slower when that thing is scanning the computer.

I am sure the problem won't be some virus because I have just re-set the computer totally.

There is nothing but My Computer, IE and other folder which are necessary.
 

Slapshot136

Divide et impera
Reaction score
471
I have that programme, but that doctor just made my computer even slower when that thing is scanning the computer.

I am sure the problem won't be some virus because I have just re-set the computer totally.

There is nothing but My Computer, IE and other folder which are necessary.

the point of the as scanner is to scan your computer, then finish, and after it finishes then your computer may be faster..

and manually deleting files really isnt the answer to viruses/ads, viruses like to hide amongst the system files, and spyware likes to hide within your cookies, which would not have been deleted..
 

BANANAMAN

Resident Star Battle Expert.
Reaction score
150
just have someone else clean the insides for you. Some computer shops offer this type of service.

The minimum space you'll need so that your computer does not slow down considerably is 250mb (i think) But i like to keep it at 1.2 GB for optimum preformance
 

tommylee0923

New Member
Reaction score
2
the point of the as scanner is to scan your computer, then finish, and after it finishes then your computer may be faster..

and manually deleting files really isnt the answer to viruses/ads, viruses like to hide amongst the system files, and spyware likes to hide within your cookies, which would not have been deleted..

Sorry, I forgot to mention something, that program has stolen a lot of space in my computer, and That's what I am mean when I say "it made my computer slower"
 

onejube

New Member
Reaction score
1
I recommend the following...

Click start >> control panel >> then add/remove programs then Remove/uninstall any of those listed make sure you double check the microsoft and windows programs they maybe important
Click start >> all programs >> Accessories >> system tools
Use Disk defragmentation, disk clean up and should could try system restore, knowing that u havent used your computer in a while
 

tommylee0923

New Member
Reaction score
2
Okay, here's the good news

The good news is that I tried to clean my disk, and then my computer works faster, but not faster than new computers......
Still, thanks.
 

ReVolver

Mega Super Ultra Cool Member
Reaction score
609
Run this program CCleaner it removes unwanted space on your computer and fixes lots of registry errors which can cause your computer to slow down. The first time I sued this I had 2,200mb of useless temp files and around 130 registry errors.
 

tommylee0923

New Member
Reaction score
2
Another question for sure.

My computer is very slow, if I replace a new 3D graphic card, will it be faster???

Or it will work if I replace a new motherbroad?
For my experience before, I always have a thought that new motherbroad and 3D graphic card will make the computer faster. Is that true?
 

Slapshot136

Divide et impera
Reaction score
471
motherboard - no, this really is more for connectivity
graphics card - for games and not much else (aero effects, etc.)

cpu/memory/hard drive will probably be what you want, post what you have so we have an idea though, since in order to change the cpu/memory you may need a new motherboard
 

Drakethos

Preordered Sc2 ftw!
Reaction score
56
Well, 3D graphics card, will help anything visual load faster, especially if it has a ram cache to levitate graphics memory. If you buy a new Mother Board, it has to be the same brand as your processor, otherwise it will not be compatible. If you want a bit more speed, ram will always make a difference. But having a good Graphics card helps a lot, if you watch videos, and play a lot of games.
 

Fun_

New Member
Reaction score
1
What?

That is strange, because I downloaded some version and it did not make my computer slower. Lol, :(.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top