Other Roller Coaster

What Do you think of roller Coaster?

  • Cool Game, I would play this, and more then once.

    Votes: 85 63.0%
  • Yes Sounds Like Somthing i might would try once.

    Votes: 30 22.2%
  • Sounds intersting, But I dont think i would enjoy playing it

    Votes: 11 8.1%
  • This is a horrible game idea, or a horrible game idea for warcraft

    Votes: 9 6.7%

  • Total voters
    135

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Version Alpha 2.8b
*Track Max = 8100/Total Players Playing, Before it was 1k
*Major bug Fixed (I thought I Fixed it before, but am 99% sure its fixed now)
*Zoom out, is much less limited
*You can build to 10,000 Height. That is 4x Higher Then before.
*You can now hit Much higher speeds, depending how high you go.
*Speed is now in MPH
*Minor Grammar Fix's

Download Here
 

Nherwyziant

Be better than you were yesterday :D
Reaction score
96
Bug found:
1: Can make a track pass through another track when you have a long track.
2: The camera goes wiggly after riding a long track.

I got a replay and save game, but after loading them, they causes fatal so their useless now.
I have 2900+ tracks on that.

Also, the camera goes out of track on ride. Have a look, I took screenshots.

outoftrack.jpg
outoftrack2.jpg

I only got 2, cause I didn't notice to get screenshots at the start.

Made on the latest map of yours. (v.2.8b)

Edit: hey, what the hell is norm and MPH?
 

MagnaGuard

Active Member
Reaction score
49
Think MPH is miles per hour and Norm is the force that is pushing up to prevent the roller coaster from falling to earth
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
1: Can make a track pass through another track when you have a long track.
Can you give me a clear screen shot of this, or point out where it is on your current one. Other wise I have no idea how to check and fix it. I track going though a track in your current screen shot

2: The camera goes wiggly after riding a long track.
So not during the ride, but after the ride the camera doesn't set back to normal? I Belive you, but i haven't seen this happen to me before. So a replay that will run, If not that steps of what you did in detail so i can recreate what happened. Ill take a look but with out a replay of it happening its hard to fix.

If you don't like that it lags with so many tracks, i can limit you if you want. I do plan on limiting it in most game modes, but leaving one game mode open to build as many as my system can support.

Anyway, Cool Coaster!

Edit: hey, what the hell is norm and MPH?
Yep MagnaGuard is right its miles per hour. As for the other i can only assume MagnaGuard is right, because i let someone else do the physics system, as mine was so poor and i have never took a physics class.
 

Nherwyziant

Be better than you were yesterday :D
Reaction score
96
Can you give me a clear screen shot of this, or point out where it is on your current one. Other wise I have no idea how to check and fix it. I track going though a track in your current screen shot

Here you go. Well, I made this one in another game, cuz I totally can't load the other one.
Bugs are in red circle

bug1r.jpg
bug2i.jpg
bug3.jpg

So not during the ride, but after the ride the camera doesn't set back to normal?

Yes, it goes round and round and point to point xD

I made another replay and saved game, but same, they still cause fatal error.
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
k, I see. Ill run some test to see if i can make it happen. And see if i can fix it. I fixed it at one point, But i think what happend is I uploaded that version, but then changed a older version, and everything in that update was lost. EHh!

But ill try to get on it in one of the next versions ahead. Thanks alot for the clear pictures. :)

Version Alpha 2.8e
*Fixed Bug caused by the more player depending on how many players. (Caused Many bugs and crash's. I updated alot of triggers to work accordingly.)
*Fixed Player 7
*Redesigned Interface. Basically Removed a few functions, and only allowed them after the coaster is built.
*Added a Name your coaster Function
*Tells how many tracks are left.
*Redid Change Track Model, It now doesn't kill your coaster when you do it.
*Removed Ride and Open and Close coaster functions, as they were near useless. You can still ride you just need to walk your guy onto the circle.

Download Here
 

Nherwyziant

Be better than you were yesterday :D
Reaction score
96
Found 4 bugs on your latest map (v2.8e)

1. The multicolor bug

rc1ed.jpg
rc3w.jpg

2. Colliding Tracks

rc4m.jpg
rc5.jpg
rc5.jpg

3. Spelling Error

rc2gv.jpg

well, it should be "enough".

4. Wiggling Camera

And now, the proof has revealed itself! Mr. Replay is working!

NOTE: The wiggling camera is also at the replay, but this time, the magnitude of the wiggly camera is kinda low. so put your camera at the coasters after 14 minutes of the replay and you will see the effect. Well, some wiggling cameras are more annoying cuz they go round n round. but this one is point to point xD
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Ill Check it out.

Thanks for helping me find these bugs. People were talking about some of these on line But I wasn't noticing it. But this helps me see the bugs clearly and how to fix them. Thanks.

Are you runing on a mac?

1.Fixed
2.Fixed
3.Fixed
4.Wiggling Camera. Ill Look into this more, I pretty tired so ill look at it at a latter point

This will be in next update.
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Version Alpha 2.8f
*Fixed Stats
*Fixed Tracks from being able to go though each other.
*Fixed Colors from not working past 500 tracks
*Fixed Type-O's
*Removed 2 things from speed menu

Download Here
 

Nherwyziant

Be better than you were yesterday :D
Reaction score
96
Bug found on latest version. (2.8f[here], 2.8g[on hive])

*Fixed Tracks from being able to go though each other.

Um, what do you mean?

bug1b.jpg
bug2x.jpg
bug3oz.jpg
bug4hw.jpg

Q: How did I manage to take a screenshot upside down?
A: It's the Camera Wiggle, of course!

Once again, Mr. Replay is here to make a proof. Now, the camera wiggle is now to be seen more accurate!

When the last ride is almost done, set the replay speed to 1x, so that camera wiggle will go upside down. The replay speed does not affect the speed of the Camera wiggle.

Edit: The third screenshot is not a colliding track, i just made a sample for the camera wiggle.
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Well, I thought i fixed it. Ill run though all the code that checks for tracks going thought each other latter today If i find time. And ill look into the camera thing.

I think it allows you to brake the rules when you build more then the old max of 1000. I know where to look, but i thought i already changed it. Am I right?
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Version Alpha 2.9
*Added Game Intro
*New Icons, Should be much more clear
*Revamped Question Marks
*Updated And Fixed Tips
*Major Cleaning of Code
*Added more to Stats
*Minor Bug Fix's.

Download Here
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Ya the update was broke. But I fixed the issue, be sure to play 2.9a and not 2.9 or you wont be able to ride your coaster.

But thanks for the support. :)
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Version Alpha 2.9b
*Easy-er to finish coasters
*Enhanced Builder
*Added camera lock to tracks, Can be turned off
*Intro is now shorter, as it runs faster
*Max Height is lower

Download Here
 

Joccaren

You can change this now in User CP.
Reaction score
54
Ooh, trying now. Enhanced builder sounds kinda interesting. I wonder what that does...
 

rover2341

Is riding a roller coaster...Wee!
Reaction score
113
Version Alpha 2.9c and Version Alpha 2.9b
*End Coaster Spell
*Camera that locks to tracks has been improved
*Intro is now under 30 seconds.
*Change Model Type has been fixed, it used brake things.
*Cameras for builder run much more smooth instead of instant like before.
*Easy-er to finish coasters
*Enhanced Builder
*Added camera lock to tracks, Can be turned off
*Max Height is lower

Download Here
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Monovertex Monovertex:
    How are you all? :D
    +1
  • Ghan Ghan:
    Howdy
  • Ghan Ghan:
    Still lurking
    +3
  • The Helper The Helper:
    I am great and it is fantastic to see you my friend!
    +1
  • The Helper The Helper:
    If you are new to the site please check out the Recipe and Food Forum https://www.thehelper.net/forums/recipes-and-food.220/
  • Monovertex Monovertex:
    How come you're so into recipes lately? Never saw this much interest in this topic in the old days of TH.net
  • Monovertex Monovertex:
    Hmm, how do I change my signature?
  • tom_mai78101 tom_mai78101:
    Signatures can be edit in your account profile. As for the old stuffs, I'm thinking it's because Blizzard is now under Microsoft, and because of Microsoft Xbox going the way it is, it's dreadful.
  • The Helper The Helper:
    I am not big on the recipes I am just promoting them - I use the site as a practice place promoting stuff
    +2
  • Monovertex Monovertex:
    @tom_mai78101 I must be blind. If I go on my profile I don't see any area to edit the signature; If I go to account details (settings) I don't see any signature area either.
  • The Helper The Helper:
    You can get there if you click the bell icon (alerts) and choose preferences from the bottom, signature will be in the menu on the left there https://www.thehelper.net/account/preferences
  • The Helper The Helper:
    I think I need to split the Sci/Tech news forum into 2 one for Science and one for Tech but I am hating all the moving of posts I would have to do
  • The Helper The Helper:
    What is up Old Mountain Shadow?
  • The Helper The Helper:
    Happy Thursday!
    +1
  • Varine Varine:
    Crazy how much 3d printing has come in the last few years. Sad that it's not as easily modifiable though
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top