Help - Spell not working

tuantai120

Cool Member
Reaction score
1
Trigger:
  • Charge
    • Events
      • Unit - A unit Starts the effect of an ability
    • Conditions
      • (Ability being cast) Equal to Charge
    • Actions
      • Set Charge_Caster[Charge_MuiCount] = (Triggering unit)
      • Set Charge_Target[Charge_MuiCount] = (Target unit of ability being cast)
      • Set Charge_Point1[Charge_MuiCount] = (Position of Charge_Caster[Charge_MuiCount])
      • Set Charge_Point2[Charge_MuiCount] = (Position of Charge_Target[Charge_MuiCount])
      • Set Charge_Angle[Charge_MuiCount] = (Angle from Charge_Point1[Charge_MuiCount] to Charge_Point2[Charge_MuiCount])
      • Set Charge_Distance[Charge_MuiCount] = (Distance between Charge_Point1[Charge_MuiCount] and Charge_Point2[Charge_MuiCount])
      • Set Charge_Fade[Charge_MuiCount] = 0.00
      • Unit - Turn collision for Charge_Caster[Charge_MuiCount] Off
      • Unit - Make Charge_Caster[Charge_MuiCount] Invulnerable
      • Special Effect - Create a special effect at Charge_Point1[Charge_MuiCount] using Abilities\Weapons\AncientProtectorMissile\AncientProtectorMissile.mdl
      • Set Charge_Spec[Charge_MuiCount] = (Last created special effect)
      • Custom script: call RemoveLocation (udg_Charge_Point1[udg_Charge_MuiCount])
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • Charge_MuiCount Equal to 0
        • Then - Actions
          • Countdown Timer - Start Charge_Timer as a Repeating timer that will expire in 0.04 seconds
        • Else - Actions
      • Set Charge_MuiCount = (Charge_MuiCount + 1)

Trigger:
  • ChargeLoop
    • Events
      • Time - Charge_Timer expires
    • Conditions
    • Actions
      • For each (Integer Charge_MuiInst) from 0 to (Charge_MuiCount - 1), do (Actions)
        • Loop - Actions
          • Set Charge_Point3[Charge_MuiInst] = (Position of Charge_Caster[Charge_MuiInst])
          • Set Charge_Point4[Charge_MuiInst] = (Charge_Point3[Charge_MuiInst] offset by 40.00 towards Charge_Angle[Charge_MuiInst] degrees)
          • Unit - Move Charge_Caster[Charge_MuiInst] instantly to Charge_Point4[Charge_MuiInst]
          • Set Charge_Fade[Charge_MuiInst] = (Charge_Fade[Charge_MuiInst] + 8.00)
          • Unit - Create 1 Dummy Cooler for (Owner of Charge_Caster[Charge_MuiInst]) at Charge_Point3[Charge_MuiInst] facing Charge_Angle[Charge_MuiInst] degrees
          • Set Charge_Dummys[Charge_MuiInst] = (Last created unit)
          • Unit - Add a 1.00 second Generic expiration timer to Charge_Dummys[Charge_MuiInst]
          • Animation - Change Charge_Dummys[Charge_MuiInst]'s vertex coloring to (100.00%, 100.00%, 100.00%) with Charge_Fade[Charge_MuiInst]% transparency
          • Animation - Play Charge_Caster[Charge_MuiInst]'s spell channel 2 animation
          • Animation - Play Charge_Dummys[Charge_MuiInst]'s spell channel 2 animation
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • Charge_Distance[Charge_MuiInst] Less than or equal to 50.00
            • Then - Actions
              • Special Effect - Destroy Charge_Spec[Charge_MuiInst]
              • Unit - Turn collision for Charge_Caster[Charge_MuiCount] On
              • Unit - Make Charge_Caster[Charge_MuiCount] Vulnerable
              • Unit - Cause Charge_Caster[Charge_MuiCount] to damage Charge_Target[Charge_MuiCount], dealing 5000.00 damage of attack type Spells and damage type Normal
              • Set Charge_Caster[Charge_MuiInst] = No unit
              • Set Charge_MuiCount = (Charge_MuiCount - 1)
            • Else - Actions
          • Custom script: call RemoveLocation (udg_Charge_Point4[udg_Charge_MuiInst])
          • Custom script: call RemoveLocation (udg_Charge_Point3[udg_Charge_MuiInst])
          • For each (Integer A) from 0 to (Charge_MuiCount - 1), do (Actions)
            • Loop - Actions
              • Set Charge_Angle[(Integer A)] = Charge_Angle[((Integer A) + 1)]
              • Set Charge_Caster[(Integer A)] = Charge_Caster[((Integer A) + 1)]
              • Set Charge_Dummys[(Integer A)] = Charge_Dummys[((Integer A) + 1)]
              • Set Charge_Target[(Integer A)] = Charge_Target[((Integer A) + 1)]
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • Charge_MuiCount Equal to 0
            • Then - Actions
              • Countdown Timer - Pause Charge_Timer
              • Custom script: exitwhen true
            • Else - Actions

thx for help :)
 

simonake

New Member
Reaction score
72
[Muicount] I don't see any Muicount anywhere in your first trigger. Could it be that?
 

XeNiM666

I lurk for pizza
Reaction score
138
Trigger:
  • For each (Integer Charge_MuiInst) from 0 to (Charge_MuiCount - 1), do (Actions)

is the same as
Trigger:
  • For each (Integer Charge_MuiInst) from 0 to 0, do (Actions)

or
Trigger:
  • For each (Integer Charge_MuiInst) from 0 to -1, do (Actions)



therefore does not do any actions
 
General chit-chat
Help Users
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/
  • The Helper The Helper:
    I think we need to add something to the bottom of the front page that shows the Headline News forum that has a link to go to the News Forum Index so people can see there is more news. Do you guys see what I am saying, lets say you read all the articles on the front page and you get to the end and it just ends, no kind of link for MOAR!
  • The Helper The Helper:
    Happy Wednesday!
    +1
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    Sticking with the desserts for now the latest recipe is Fried Apple Pies - https://www.thehelper.net/threads/recipe-fried-apple-pies.194297/
  • The Helper The Helper:
    Finally finding about some of the bots that are flooding the users online - bytespider apparently is a huge offender here - ignores robots.txt and comes in from a ton of different IPs
  • Monovertex Monovertex:
    @The Helper I'm really not seeing the "Signature" link in the sidebar on that page. Here's a screenshot:
  • The Helper The Helper:
    I have reported it - I was wondering why nobody I have given sigs to over the last few years have used them
  • The Helper The Helper:
    Ghan has said he has fixed this. Monovertex please confirm this fix. This was only a problem with people that had signatures in the upper levels like not the special members but the respected members.
  • The Helper The Helper:
    Here is a better place to manage this stuff https://www.thehelper.net/account/account-details which I think should be way more visible
  • The Helper The Helper:
    I am hoping that online user count drop is finally that TikTok bot banned

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top