Setting Points

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
hello, I need a little bit more help with a spell (again) >.<

With my spell it selectsa random unit from my set unit group, and creates a bunch of dummies leading to the unit.

I figured the easiest way to do this would be map a loop, then have the dummy add in with the position having a polar offset. Now how would I set it so that the dummies go to the unit.

The unit group are all units within 750 range of the casting hero.
 

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
This is what I currently have for a trigger:

Code:
Effects
    Events
        Time - assassin_Timer expires
    Conditions
        (Caster has buff Assassin Strike ) Equal to True
    Actions
        Set assassin_Target = (Random unit from assassin_TargetGroup)
        Set assassin_TargetPoint = (Position of assassin_Target)
        For each (Integer A) from 0 to 24, do (Actions)
            Loop - Actions
                Unit - Create 1 Assassin [Dummy] for (Owner of Caster) at (Position of Caster) facing Default building facing degrees
                Set assassin_Dummy[(Integer A)] = (Last created unit)

I need to change assassin_TargetPoint to a real variable so I can use it as a polar offset, but I don't know how to do set a position (x,y) into a real.

Also, how to you change the transparency of a unit?
 

Ghan

Administrator - Servers are fun
Staff member
Reaction score
889
Ok, right after you create the unit, just order the unit to move to the position of the target.
Preferably use a variable to remove the leaks....
Or am I misunderstanding you?
 

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
you are probably misunderstanding me

What I need done is that the trigger needs to do this:
1. When the timer expires it picks a random unit from my unit group and sets a variable to the unit, as well as to the position of the unit (in a real variable)
2. it then creates my dummy units in a line to that unit (my dummys are demon hunters).
3. it teleports the casting hero behind the unit, and the rest i can do.

hopefully that clears thing up :D
 

Ghan

Administrator - Servers are fun
Staff member
Reaction score
889
You can't set a point to a real variable.
And I don't think there's a reason you would need to.

I think you want something like this:

Code:
Set Offset_Point = Caster_Location offset by ((Real((Integer A))) x 100.00) towards (Angle from Caster_Location to Target_Location) degrees)
 

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
Yes it is, which is why I am trying to ask questions so that I don't get the direct trigger, that way I am not cheating ^_^

and thanks Ghan, so that would be what point exactly?
 

Ghan

Administrator - Servers are fun
Staff member
Reaction score
889
> so that would be what point exactly?

Well, the points that you use for the position of the caster and the position of the targeted unit.
Put that in the loop before you create the unit, then create the unit at that point, then remove the leak.
Because of the Integer A, it will increase the distance away that the units are each time they are created.
 

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
Thanks for the help.

Now I got some volunteer work to do so when I get home I will test this out ^_^
 

hell_knight

Playing WoW
Reaction score
126
Rules:

* You can use GUI or JASS. However, all spell related code must be written by you, barring a generic game cache system, or vJASS
* Your entered spell must be made specifically for this contest, and must not have been started before the official start of this contest
* Imported models / icons are not allowed, unless they have been made by you specifically for this contest (unless special consideration is given - pm me for more info)
* You may receive no help from anyone in the creation of your spell
* Your spell must fit the theme, if you have questions, pm me
* I reserve the right to cancel this contest at any time for any reason
_________________________________________________________________________

True you are not asking it direcetly, but direcetly posting your code, and the only purpose you are asking this IS to finish that spell. Is pretty much cheating or that rule would be pretty meaningless cause we don't support OH HERES MY MAP GO FINISH THE SPELL FO ME
( Should let judge decide though)
 

Demonwrath

Happy[ExtremelyOverCommercializ ed]HolidaysEveryon
Reaction score
47
>OH HERES MY MAP GO FINISH THE SPELL FO ME

Umm...how is...

I can't figure this line of code out, can you give me a few pointers or help?

cheating?

Although, I will ask Acehart about I guess.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/
  • The Helper The Helper:
    I think we need to add something to the bottom of the front page that shows the Headline News forum that has a link to go to the News Forum Index so people can see there is more news. Do you guys see what I am saying, lets say you read all the articles on the front page and you get to the end and it just ends, no kind of link for MOAR!
  • The Helper The Helper:
    Happy Wednesday!
    +1
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    Sticking with the desserts for now the latest recipe is Fried Apple Pies - https://www.thehelper.net/threads/recipe-fried-apple-pies.194297/
  • The Helper The Helper:
    Finally finding about some of the bots that are flooding the users online - bytespider apparently is a huge offender here - ignores robots.txt and comes in from a ton of different IPs
  • Monovertex Monovertex:
    @The Helper I'm really not seeing the "Signature" link in the sidebar on that page. Here's a screenshot:
  • The Helper The Helper:
    I have reported it - I was wondering why nobody I have given sigs to over the last few years have used them
  • The Helper The Helper:
    Ghan has said he has fixed this. Monovertex please confirm this fix. This was only a problem with people that had signatures in the upper levels like not the special members but the respected members.
  • The Helper The Helper:
    Here is a better place to manage this stuff https://www.thehelper.net/account/account-details which I think should be way more visible
  • The Helper The Helper:
    I am hoping that online user count drop is finally that TikTok bot banned
  • Ghan Ghan:
    I added the filter last night.
  • The Helper The Helper:
    They are still there

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top