Icons slowly changing as cooldown decreases

Status
Not open for further replies.

bananaHUNT

You can change this now in User CP
Reaction score
55
If you've played the new DotA map, you will notice that now when you use a skill the button/icon gets passive borders that then transcend into the active one! I wonder how they managed to do this.. I'm totall puzzled?
 

FarAwaY

TH.net Regular
Reaction score
9
Create 2 spells of the same kind, one wif the icon of the passive, the other is icon of the active.

Use a trigger to see what lvl it transcends to the active one and so, remove the passive ability and add in the active ability.
 

bananaHUNT

You can change this now in User CP
Reaction score
55
Have you actually played the map?
It doesn't just add an ability with an active icon. When you use an ability, the borders of the icon slowly turn from passive into active, while the cooldown decreases. It's really ingenieus
 

FarAwaY

TH.net Regular
Reaction score
9
Riiight..you think such things as ingenious...I'd seen much better things done by map makers.
Well, fine wif me but no, I havent actually played the map so I wouldnt know what ur talking abt.
 

WolfieeifloW

WEHZ Helper
Reaction score
372
Riiight..you think such things as ingenious...I'd seen much better things done by map makers.
I love people who think they're so good by being rude :thdown: .

Anyways GeertPingen, maybe check into Image in triggers and such?
I also have no idea really how it's done ;) .

PS: I think it's ingenious too.
 

Lumograph090

New Member
Reaction score
22
I love people who think they're so good by being rude :thdown: .

Anyways, GeertPingen, maybe check into Image in triggers and such?
I also have no idea really how it's done ;) .

PS: I think it's ingenious too.

especially when they type like 4 year old retards

Riiight..you think such things as ingenious...I'd seen much better things done by map makers.
Well, fine wif me but no, I havent actually played the map so I wouldnt know what ur talking abt.

YAH NUW ABT I MIEN?
 

WolfieeifloW

WEHZ Helper
Reaction score
372
For others:
Official DotA Allstars Changelog said:
* Added a new subtle cooldown effect to make it a little clearer when spells are in cooldown and when they finish. This is mainly for long cooldown spells where it is sometimes difficult to tell. More work will be done in this area soon, but it needs a bit more time to make sure that anything extra is not visually intrusive. (PGRu-Unexpect3D)
Quote found here.
 

Ghostwind

o________o
Reaction score
172
Riiight..you think such things as ingenious...I'd seen much better things done by map makers.
Well, fine wif me but no, I havent actually played the map so I wouldnt know what ur talking abt.

It is actually a pretty nice touch. I think it's done with images.
 
Status
Not open for further replies.
General chit-chat
Help Users
  • Varine Varine:
    I bought an Ender 3 during the pandemic and tinkered with it all the time. Just bought a Sovol, not as easy. I'm trying to make it use a different nozzle because I have a fuck ton of Volcanos, and they use what is basically a modified volcano that is just a smidge longer, and almost every part on this thing needs to be redone to make it work
  • Varine Varine:
    Luckily I have a 3d printer for that, I guess. But it's ridiculous. The regular volcanos are 21mm, these Sovol versions are about 23.5mm
  • Varine Varine:
    So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
  • Varine Varine:
    I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
  • Varine Varine:
    Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
  • Varine Varine:
    Partsbuilt has individual parts I found but they're expensive. I think I can get bits swapped around and make this work with generic shit though
  • Ghan Ghan:
    Heard Houston got hit pretty bad by storms last night. Hope all is well with TH.
  • The Helper The Helper:
    Power back on finally - all is good here no damage
    +2
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    New recipe is another summer dessert Berry and Peach Cheesecake - https://www.thehelper.net/threads/recipe-berry-and-peach-cheesecake.194169/
  • The Helper The Helper:
    I think we need to add something to the bottom of the front page that shows the Headline News forum that has a link to go to the News Forum Index so people can see there is more news. Do you guys see what I am saying, lets say you read all the articles on the front page and you get to the end and it just ends, no kind of link for MOAR!
  • The Helper The Helper:
    Happy Wednesday!
    +1
  • V-SNES V-SNES:
    Happy Friday!
    +1
  • The Helper The Helper:
    Sticking with the desserts for now the latest recipe is Fried Apple Pies - https://www.thehelper.net/threads/recipe-fried-apple-pies.194297/
  • The Helper The Helper:
    Finally finding about some of the bots that are flooding the users online - bytespider apparently is a huge offender here - ignores robots.txt and comes in from a ton of different IPs
  • Monovertex Monovertex:
    @The Helper I'm really not seeing the "Signature" link in the sidebar on that page. Here's a screenshot:
  • The Helper The Helper:
    I have reported it - I was wondering why nobody I have given sigs to over the last few years have used them
  • The Helper The Helper:
    Ghan has said he has fixed this. Monovertex please confirm this fix. This was only a problem with people that had signatures in the upper levels like not the special members but the respected members.
  • The Helper The Helper:
    Here is a better place to manage this stuff https://www.thehelper.net/account/account-details which I think should be way more visible
  • The Helper The Helper:
    I am hoping that online user count drop is finally that TikTok bot banned

      The Helper Discord

      Members online

      No members online now.

      Affiliates

      Hive Workshop NUON Dome World Editor Tutorials

      Network Sponsors

      Apex Steel Pipe - Buys and sells Steel Pipe.
      Top