Dtere
Administrator
- Reaction score
- 22
Hey guys, i'm having a few troubles with norton ghost 7.0 / 7.5 at work. All of us there really don't know much about the program, other than how to image computers through the muliticast server. The guy that knew the most information about the program was just laid off the other day. So after that, i'm the one who knows the most about the program, since I was trained by the guy who got laid off.
So here's a few questions i have, if any of you can help me out with it.
1. How do you add NDIS2 drivers?
- On a note about these, i've been trying to get a 3COM 3CCFE575B/3CCFE575C NDIS2 driver. I have found the NDIS2 driver off of 3COMs website (it's included with the driver package). Yet when i add the NDIS2 driver to norton ghost, it will not create a working disc for the Compaq Armada 700 series computers. Maybe it is not supported by that computer? Protocol.ini file seems like a place to start, but i'm not sure exactly what i'm messing with in there. The laptop always gives an error about not being able to see the PC card while trying to boot up the DOS session for Norton Ghost.
2. Does anyone know a good site for NDIS2 drivers?
- We use a lot of different NICs and PC cards to do imaging. A good site with a broad amount of NDIS2 drivers would be great.
3. How do i setup a TCP/IP network boot from Norton Ghost?
- A note about these, TCP/IP network boot allows you to run an imaging session without using a network boot disk on the computer you want to image. Thus eliminating a step in the process of imaging. Can anyone tell me directions on how to set this up?
So here's a few questions i have, if any of you can help me out with it.
1. How do you add NDIS2 drivers?
- On a note about these, i've been trying to get a 3COM 3CCFE575B/3CCFE575C NDIS2 driver. I have found the NDIS2 driver off of 3COMs website (it's included with the driver package). Yet when i add the NDIS2 driver to norton ghost, it will not create a working disc for the Compaq Armada 700 series computers. Maybe it is not supported by that computer? Protocol.ini file seems like a place to start, but i'm not sure exactly what i'm messing with in there. The laptop always gives an error about not being able to see the PC card while trying to boot up the DOS session for Norton Ghost.
2. Does anyone know a good site for NDIS2 drivers?
- We use a lot of different NICs and PC cards to do imaging. A good site with a broad amount of NDIS2 drivers would be great.
3. How do i setup a TCP/IP network boot from Norton Ghost?
- A note about these, TCP/IP network boot allows you to run an imaging session without using a network boot disk on the computer you want to image. Thus eliminating a step in the process of imaging. Can anyone tell me directions on how to set this up?