Guys i have a problem how to make a boomerang tower?
Me and my friend want to make a TD my friend has an idea he said that " could you make a boomerang tower " and i said i dont know how i post this so anyone can make this coz im a beginner.
So you want both? If you just want the shot to bounce on X enemies, I think there's an option in the object editor for the specific unit. I'm not sure though.
theres a bounce option on the attack type option i think and i want the missile to return once it hits on the X enemies thats my problem on how to?
plz. help me
Then you should play around in the editor for a while before you start using dummy units and the "advanced" part of the GUI.
Try google 'wc3 editor help' and go the first link, then read some guides and try them out yourself.. If you don't have much experience using triggers, then I think it's slightly too much to start out using variables and dummy units etc.
Whoa whoa whoa. Make a skill based on the Night Elves Moon Glaive, set the targets allowed to the number of bounces you want, set the max AOE for full damage to the bouncing area that you want, and make sure theres no requirements on moon glaive. Also set the attack type to missile (bounce) and then remove requirements on the night elf spell. Then just watch it bounce.
because that isn't actually as hard as it might seem.
Look at number of targets in the objects attack information, then add like Moon Gliave or whatever it's called.
I can't remember exactly how to do it, but it's something around those lines.
If you want it to bounce back, then like said above you will need to trigger it.
Do you want the attack cooldown to only be reset once it returns?
-That could be extremely hard.
If you just want the animation.
-Then just use a dummy unit to make a 'dummy effect' on every attack, although timing is a problem.
This could be very hard if you are not comfortable with triggers.
----
EDIT: lol, you just beat me to saying that. in the same minute -.-
So, 2.5mm longer. But the thing that measures the bed is about 1.5mm above the nozzle, so if I swap it with a volcano then I'm 1mm behind it. So cool, new bracket to swap that, but THEN the fan shroud to direct air at the part is ALSO going to be .5mm to low, and so I need to redo that, but by doing that it is a little bit off where it should be blowing and it's throwing it at the heating block instead of the part, and fuck man
I didn't realize they designed this entire thing to NOT be modded. I would have just got a fucking Bambu if I knew that, the whole point was I could fuck with this. And no one else makes shit for Sovol so I have to go through them, and they have... interesting pricing models. So I have a new extruder altogether that I'm taking apart and going to just design a whole new one to use my nozzles. Dumb design.
Can't just buy a new heatblock, you need to get a whole hotend - so block, heater cartridge, thermistor, heatbreak, and nozzle. And they put this fucking paste in there so I can't take the thermistor or cartridge out with any ease, that's 30 dollars. Or you can get the whole extrudor with the direct driver AND that heatblock for like 50, but you still can't get any of it to come apart
I think we need to add something to the bottom of the front page that shows the Headline News forum that has a link to go to the News Forum Index so people can see there is more news. Do you guys see what I am saying, lets say you read all the articles on the front page and you get to the end and it just ends, no kind of link for MOAR!
Finally finding about some of the bots that are flooding the users online - bytespider apparently is a huge offender here - ignores robots.txt and comes in from a ton of different IPs
Ghan has said he has fixed this. Monovertex please confirm this fix. This was only a problem with people that had signatures in the upper levels like not the special members but the respected members.